Carving Kids II

Carving is an extraordinary symbiosis between the natural structure of wood and a variety on graphic design. The innovative Carving technology enables us to engrave classic, retro-modern and contemporary designs into naturally oiled wood surfaces.

Carv

ing Kids II accompanies your little Explorers with lots of Creativity and Fun through their childhood. The design enables Children to develop an imaginative and individual identity by allowing them to impose their own stamp on their floor. Whether on the

floor or the wall - mafi loves to contribute to the design of a personal living space. With this design Painting is always and anywhere allowed.

Larch plank with small, close yearly rings in 3-layer construction, bevelled on the long side and with

approx. 5mm top layer, with approx. 5 mm backing in the same wood and middle layer conifer. Tongue and groove on all sides for easy installation. Knots up to 50 mm diameter and splay knots (30 x 60 mm) are possible as well as max. 2 wrong knots per meter

length of plank. A max. of 4 resin pockets per plank as well as cracks up to 50 cm and some sapwood are admissible.

The graphic design is split across 3 floor planks and is repeated several times lengthwise. The planks are numbered on the head end

of the groove (1/3, 2/3, 3/3). In order to avoid joins in the same position, there are indicators where to cut and these are marked with "CUT" along the groove.