Artemide Outdoor

Cuneo floor and wall lamp

Light fixture with direct side emission, with high-performance LED light sources. Six monochromatic LEDs are used together with six collimators and a light-diffusing prismatic screen to obtain an optimum lighting beam. Floor or wall installation. In the wall installation, the light can be pointed either upwards or downwards. Available in two finishes: light grey painted and rust painted.

Composed by lighting cap and terminal board fixed together by means of locking screws. Cap and terminal board in die-cast EN AB-47100 aluminium, gaskets in silicone rubber. Electronic ballast integrated in the fixture. PMMA collimators installed on the LED light sources. Light-diffusing prismatic screen in PMMA siliconed flush with the lighting cap. Power connection to the mains to be carried out outside the fixture, without need of opening it, by means of a pre-installed IP65 connection device suitable for cables with a diameter between 6 and 13 mm. Wall installation by means of a bracket in folded steel sheet to which the fixture is fastened with two screws. Screws in AISI 316 stainless steel. All the components in die-cast aluminium and the steel bracket for wall or floor fixing are painted by means of 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint.